Équipement d'alpinisme

Texte verbatim extrait du PDF original du chapitre (1940–). Le catalogue d'origine est en anglais ; les tableaux de spécifications peuvent s'afficher imparfaitement — le PDF reste la source autoritative.

10mm Aluminium Offset ‘D’ 10mm Aluminium Offset ‘D’ Screwgate
18mm )) 15mm
K-5017 2200kg at, K-5018
11mm Aluminium Offset ‘D’ UIAA 11mm Aluminium Offset ‘D’ Screwgate UIAA
22mm AOA) oe = 19
68gms ~~) Tira (C25 74gms
K-5019 2500kg = => Su. K-5022
11mm Aluminium Offset 'D’ Twist Lock 13mm Aluminium Offset ‘D’ Twist Lock
15-875mm ASA) ga 16.5mm
80gms (@=>)) —e 90gms
2500 kg Aue — St 3000 kg Sut Sng
K-5023 K-5025

Both models are drop forged from high strength
aluminium. There is ample allowance for wear, each
model having a breaking strain in excess of the rope
OF Be : G ee T even when worn to half thickness.
The product is safe and simple to use and was
developed for expeditions use. It is ideal for use as a
LARGE DESCENDER fricton device for direct belaying, abseiling, stretcher
lowering etc.
tN SMALL DESCENDER
(@) 081043 140gms
76mm x 146mm
082004 227gms K-5027
84mm x 186mm SMALL MODEL
K-5026 Forged from HF15. The breaking strain when new is
LARGE MODEL 4000 kg. This model is hard anodised to give
Forged from HF30. The breaking strain when new is protection against corrosion. It is far lighter than the
6000 kg. The extra material in this model allows for large model and is therefore very popular with
heat dissipation and wear resistance and is individual climbers. The small! eye readily accepts
particularly recommended for Mountain Rescue. two karabiners.
EXPEDITION ASCENDERS STANDARD ASCENDERS
Designed for use with ‘mittened hands’. The top is for sac Compact and light. The top attachment hole is for sac hauling
hauling and’mountain rescue and the moulded handle presents and mountain rescue whilst the bottom hole is for attachment to
a smooth surface for tape attachment to the rope. The trigger the rope via a karabiner, which also prevents accidental removal
release locks the rope in position. of the rope

> coGs
Nuts are made from high strength wY W | Y mm
Aluminium alloy. The wire used forthe [Basa a
construction of the wire slings is extra Brass 8 jeveosa| _—_[vemwenet [sf gf te | ef ta cs
high tensile, Steal and is plated for fete pape fe pet ef et eo Ly
corrosion resistance. The joint is made | 1_| Si} ape pee
by the hydraulic swaging of a | —.[esss7a[ sssooe] 20 [27 | 26 | a7 | a fe | 2 | + | o3 | 1750)
compression sleeve andisthestrongest [5 "[essoro| seso0a| a4 [a [ve [a [a7 [os [ar [eT oe [iso |
point of the sling. In all but the largest [~s [__[eseoos] 33 | 8 | 2 | | o |e | * | [ | |
sizes, the wire sling nuts giveagreater [7 | _[esroor] © | | a7 [a [a [7 [af [ [|
breaking strain than is available using [= | _[essoos] ss | @ [ww [xe [a [se [se | | |
rope or tape and they are generally [sesso] a [oy [se [= [2 [fe fe fT
easier to place. For higher breaking [ie | [eect = [eo [ote fs ,oefesl [| |
strain and ease of placement, the four
smallest wedges and the two smallest r
hexagons are only available as wire hey —
sling assemblies. eg pgs
THE USE OF TAPE SLINGS ON es
SMALLER NUTS IS NOT
fom eB few= [= fs [|
PITONS pe Bee [oe |
poof [ef |
ore ee pes [oe fo |
ANGLES
SA eee
Yor ve | femme | foe fe
Direct Aid only
SKY HOOKS MICRO PEGS
562691 Flat
44gms 551690
Straigh 25mm
e 44gms B 4| = ST 552693 + 20mm Le
Curved 2:5mmf Bent

HOLLOW
karabiner
LADDERS
Etrier “Standard” Etrier “Cengalo”
Bi a 4 alu steps, Fiffi hook. 4 steps
; Weight: 160 g Weight: 175 g
Wy iF ‘ae K-2054 K-2055
This new superiightandat The wide gate opens LE \
the same time strong smoothly and its D-shape i
karabiner sets a new makes it real handy and A ; 2=«9 a
standard for karabiners. gives proof of the best ’ \ LY
It has a mifimum break intensions of the designer he SS
strength of 2000 kg to the climber.
(aporox. 4400 Ibs.) anda _ — Every single karabiner is
max. testing strength of individually tested elec-
2200 kg (approx. 4850 Ibs). tronic-mechanically and
The weight is 43 g stamped with the min. test
(11/2 ozs.). strength.
K-2056 /inox
K-2057 /black

Fulibody harnesses — the safest system
K-2063 Anew development -— a reasonably =) : fee) K-2064
priced, light weight complete _ 4 =
fullbody harness — for beginners 2B uO =
and advanced climbers alike. =
7 Fully adjustable. Chest size, \
= = 40-115 cm. The extra wide tapes 4 =N
cf) Gas help distribute the pressure. | Sh
(a A 1) Width of chest tape - 45 mm. a = »
; = ‘ Width of leg loops 35 mm. Includes \\_ Ye
2 \] w b one gear sling on the chest harness = a |
or - 3) The tape connecting chest and seat rs << Super yn ete har-
i <\ —_ sections is adjustable in length. — accel N Neaelb eM ldleagh: Bl
pe P\ The harness can be adapted to fh ' glacier and ski areas (expeditions).
Ing ()\ ali body sizes. Openlegloops with J “JA 35mm wide tape for both chest
acs) a slip-in buckle. fs J % i and seat harness. Fully adjustable,
N i) \ \ (\.. AN suitable for all body sizes.
Colours: chest red A 4 : ' Different colour of seat harness/
| connecting tape red Ps ’ blue and chest harness/red
leg loops blue \ yo simplify use.
: \ Sewn with contrasting thread. : : Weight: 500 g.
3 — SPD GS Weight: 605 g. S Size: fully adjustable
K-2063 | K-2064
Head lamp K-2065 “>
Flat plastic box with 4,5 V battery. om “ey -\ — a, \ ~~
Head lamp and torch can be put YZ Vai” wt =f . we
together. Tofixonthehelmetby gZ I @ i f © it i) = a,
Fiffi hook Very comfortable shape. The fo]
K-2066 flexible, basket-like inset fits every
The Fifi with a “bite”. This new, head shape and distributes vertical
improved model, has a sharp point Pens pressure points in an optimally
at the hook and a new large hook Ls, Oi, large surface, protective manner.
radius. This shape allows use in all oe Se The air vents in the shell of the — fe
circumstances, especially when Ss helmet function unusually well a
the point can be placed in nooks ee (based on the chimney principle).
and crannies in the rock. “ 8 pe 8 large air holes (about 2,2 cm?)
Zinc surface. sees ohana collection of heat even .
i Sa at high temperatures. Elastic lam
Weight 30 g. Boe oe fastening strap. p
K-2066 fi @ Colours: red, white
ey Size: adjustable
_ Weight: 580 g

k-2088 § Karabiner rope pulley
MODEL ,, Wagner” k-2058
| made of plastic \
The new StubaiKarabiner rope pulley model "Wagner” is without
i doubt sometimesa life-saving factor and represents a great step
‘ forward in mountain rescue techniques. It saves 25% energy (as 8 ‘
‘ opposed to 10% in the case of normal pulley), it slides well (pla- :
ia. ' stic, self-lubricating) and can be easily transported due to its
= i lightness (15 g, size 20x48 mm). h
Pulley «-2059
Aluminium ring, plastic wheel 045 mm, for lifting up loads
PPatNo. [rent [ ee |
Tubular Ice Screw «-2060
Forged in one piece, with slot for easy removal of ice, galvanized,
without square, with two cutters. K-2060
[ PartNo. | rom | |e
ose-isi9 | 140 | 100, |
Instep Crampons «-2061
Adjustable, zinc-plated _ : e
pace = MODEL Tirol x-2062
ogee ae =
068-1355 eee 12 points, adjustable, easy to fit on boots, made of especially se-
ae lected high tensile and cold resistant steel. Very stable crampon
— for extreme pretension; middle bars riveted on (therefore noloo-
K-2061 amet sing of srews).
C/ Quick and advantageous adaption:
The crampon can be adjusted to the boot from front and back.
The middle bars are flat and of softer metal and can be formed to
the boot for an exact fit without heating.
Adjustable in length with triple safety:
Threat in counter bar prevents srew from coming out; nut as ad-
ditional protection; riveting of top of srew as final safety.
Balancing safety:
Due to the bigger distance in width of the first pair of downward
K-2062 points from each other compared with the two front points much
less danger in toppling.
Less effort:
Front points and first pair of downward points are designed fora
45° slope. Great relaxation of shank muscular system therefore.
[PartNo.| size | ¢ae |
068-1417| 42-47

\ move. Aschenbrenner with
ash shaft -2068
With flat adze and karabiner hole.
—_ [| PartNo. | Emmi | cae | [PartNo. | Femi | coe |
___ 700 | 780 068-6270| 900 | 860
‘066-3077 | 800 | 620
move. Aschenbrenner (ski
\ axe) with ash shaft «-2069
With curved adze and karabiner hole.
[Panne | rmmi | coe |
_— ge FZ [ces-2110) 630 | 760 | [ocean] e50 | 040 |
‘oso-2236] @00 | 620 |
_ Ice Piton «-2070
with ring
[o6s-2272 | 250 | 210 —*| ts0
060-2316 [350 | 310 | 210
K-2071 Snow Belay «.2071
Made of high strength aluminium, lacquered, ‘with steel wire
(PartNo. [Leng PartNo. mm [cos
[068-2352 | oss-2673 «|e
Ice Screws move. Marwa x-2072
(ese-2r17 | si055 | a0 | 20 ~—*|
o6-2735 | 1506 | 120~«| ~~
K-2072 /06s-2753 | ss077 | 120 ~+| 60 |
069-1950 | 2007 | 170 | 60 |

1. Twist ~ 2. Pull
f wT aol i.
3. Release 4. Locked .
° Strength Dimensions
Code Material |, Opening Major Minor Weight in
mm axis axis gms mm
° Alurninium 19 2500 800 109 x 62
© tama a ~ je fo [mn
Carbon Stee; }
Stainless
Steel 2000 750 150 115 x60
Twist a quarter of a turn to
open, pull back to clip on,
release gate to lock off. Se 19 3000 1200 210 | 108x61

MANUFACTURE :
All manufacturing processes are carried out entirely
in our works. Hot forged from high strength aircraft CARE AND USE
alloy, heat treatment is toA.1.D. standards and quality INSPECT the action of the gate and the screw.
control is rigorous. Components are anodised to BS Occasionally oil the mechanism with a
1615-1972 grade A10 to give maximum resistance light machine oil.
against corrosion. AVOID contract with corrosive substances
MATERIAL SPECIFICATION particularly alkalis.
BACK — Aircraft alloy HF15 - or others for special SECURITY the locking ferrule does not add to the
applications - anodised. strength of the karabiner but it does give
GATES — As above - anodised. greater gate security and it must be
LOCKING FERRULE — Free machining aluminium - fastened to ensure that there is no
anodised inadvertent opening of the gate.
RIVET AND SPRING PUSHER — High tensile CERTIFICATION
stainless steel Karabiners can be proof loaded if required to be and
SPRING — Stainless steel certificate of conformance supplied.
MANUFACTURE CARE AND USE
Made from Carbon Steel the heat treatment is very carefully INSPECT the action of the gate and the screw.
controlled. The plating of the steel components complies Occasionally oil with a light machine oil.
with BS 1397 and care is taken to avoid hydrogen ALWAYS place screwgate karabiners to ensure that
embrittlement. Component parts are plated before assembly the rope action will not release the screw.
to ensure maximum protection against corrosion and the use ALWAYS PLACE KARABINERS TO ENSURE THAT
of stainless steel, for the internal parts, ensures high THE GATE IS NOT OPENED BY PRO-
strength whilst avoiding electrolylic corrosion. JECTIONS.
MATERIAL AVOID CONTACT WITH CORROSIVE SUBSTANCES
BACKS Carbon Steel CERTIFICATION
GATES Carbon Steel t . —- .

The figures given represent the minimum breaking
ee FERRULES . it carbon cane strain of the karabiner when tested over 12 mm pins.
bs lhed PUSHER be tenella ctaininee Sec Components can be proof loaded and certifcates of

y conformanc ided. Plating i B .
SPRING High tensile stainless Steel Genes previced, Mating is to BS 1706 ZN3

This is a complete range of industrial and safety fittings and has quote for alternative materials. Clog offer a design service and
been developed in response to our industrial customers’ will advise customers on the application of various fittings.
requirements. The fittings carry the accepted Clog standard of All the manufacturing processes are carried out entirely in our
finish and manufacture. works including forging, heat treatment and plating. Steel
Destruction tests, proof loading and certification can be components are normally plated to BS 1706 ZN3 but other
supplied. The breaking strain of components is dependent on thicknesses can be supplied on request. Anodising is to BS
the application. The components listed below are fittings 1615-1972 grade A10.
already manufactured by Clog but we are always happy to
? oe 4 2a ot \ : ok? My A «
ara J : ee: gg .

Part No. MS 70087-4
Clevis, Suspension, Air Delivery, Type | 2
Drop Forged Alloy Steel
Proof-load 20,000 Ibs.
Weight (approx.) 1 Ib. 5 oz. a : _
Phosphate Finish \ Dll | i
SS Sa RG SBS SS SE EE SS SF EE EE ES
Part No. MS 70087-2 : 444mm) —_—_7
Replaces Part No. 51 B 6245 4 aallall
Clevis, Suspension Cargo, Aerial Delivery -
Drop Forged Alloy Steel
Proof-load 20,000 Ibs. .
Weight (approx.) 4 Ibs. 5 oz.
Phosphate Finish :
LF SSP SEL 1 DST IE AT AES NR EIT OT I LG SB ETT EE SS IE TE I TE IEE GENT SI TT TEE OS AIT EEE TEATS
Part No. MS 70087-3 ‘
Clevis, Suspension, Air Delivery, Type | |
Drop Forged Alloy Steel 7
Proot-load 40,000 Ibs. 2
Weight (approx.) 7 Ibs. 8 oz. (50mm)
Phosphate Finish
SS SE a EE EE SERRE NG IY Fy SS AS SE, ASE ER SIE SS SSNS SFE SET ESSE ERE Ey LEIA SES
Proof Load Definition: That load the part must hold without permanent deformation.

i — 4/2" STOCK (12mm)
Part No. MS 70085-1 (82mm) | ¥ — (16mm)
Clevis, Tie-down, Air Delivery, Type Il ( ;
Drop Forged Alloy Steel 5/8" 1 1/2
Proof-load: 7,000 Ibs. eee __, (37mm)
Weight (approx.) 1 Ib. 14 oz. :
Phosphate Finish
Ss SS eS eS SS SSS Re ee)
Part No. MS 70086-4
Previous Part No. 51 B 6719 ,
Clevis, Riser, Air Delivery, Type Ill
Drop Forged Carbon Steel x
Proof-load 2,000 Ibs.
Weight (approx.) 5.2 oz.
Phosphate Finish
a SS SSE PS Eg ee RE St eS ae See
Proof Load Definition: That load the part must hold without permanent deformation.

V-RINGS e D-RINGS e O-RINGS
Part No. MS 704415 e.
Replaces Part No. 60 B 6039 ‘
Ring - 'V"", Parachute Extraction Bag, Aerial Delivery
Drop Forged Carbon Steel gy
Weight (approx.) 3 oz. 4/2" qc
Cadmium Plated ( q
ESSE SSSR ESE SS ES SS ES,
Part No. MS 70123 ; IN
Replaces Part No. 44 A 9361 6"
Ring, Parachute Harness, Accessory Attaching 1 3/1 \
Drop Forged Steel (30mm)
Proof-load 500 Ibs.
Weight (approx.) 1.5 oz. er ee
Cadmium Plated cee
SE AERATED SEO NA ak Ea Fa ET ae 2 FS ET Oe EE EE 2 a Ee
Link, Parachute Harness Triangle 46 A KN
Drop Forged Alloy Steel (46mm) ———e
Proof-load 2,500 Ibs. ae I 316" (5
Weight (approx.) 1.5 oz. [| presen)
Cadmium Plated i
RSID SA RES NY IED EG ELE PSB ATS Se Sa BES DUI DATS, FSF SPIDERS TS WP EAE LSS ARE OI LL PST BI SI Ae SD STE)
Part No. MS 22045 | hy ~~
Replaces Part No. AN 6563 J \
Ring - “'V"', Parachute Harness 5 aunce (4 NS
Drop Forged Alloy Steel S3remn) ;
Proof-load 2,500 Ibs. =|
Weight (approx.) 2 oz. t__)} 3/8" (9mm)
-4 Cadmium Plated | ‘ aes 3 —_
-2 Phosphate Finish L (44mm) |
a EE eT IEE SPS SE BET TR ASE LS EOE SIRS OEE ONT ELST = ELT in SGD ROS Ee SF EE Oe SSE SE BS ERE a
Proof Load Definition: That load the part must hold without permanent deformation.

V-RINGS e D-RINGS e O-RINGS
Part No. MS 22046-1, -2 | hiv Se\,
Ring - ‘‘D"’", Parachute Harness 2 1 7
Drop Forged Alloy Steel 5/16 i :
Proof-load 5,000 Ibs. (58mm) : iq
Weight (approx.) 3.5 oz. i iccamemainiiaasas ons
-4 Cadmium Plated | ,
-2 Phosphate Finish i 5 3/8
Receioae {Olt Se +i eee (9mm)
L, 3/4" timmd
SS a Ss Se Be | RS ee ee)
Part No. MS 22046-3, -4 | —_——-
Ring - ‘‘D’, Parachute Harness ‘
Drop Forged Alloy Steel . /
Proof-load 5,000 Ibs. 25116 iv
Weight (approx.) 3.5 oz. amin rey
-3 Cadmium Plated seri Manned H
-4 Phosphate Finish C3 3/8"
Note: -3 and -4 same dimensions as -1 and -2 except | i - ——
2 holes 9/64" diameter drilled on center bar 1" apart. an (9mm)
L, 3/4" aimm |
a Se a a a eS ee ee ee a
Part No. MS 22046-7, -8 Part No. 1080
Ring - ‘‘D", Cargo Restraint 4 9146"
Drop Forged Alloy Steel
Proof-load 5,000 Ibs. aan
Weight (approx.) 8 oz.
-7 Cadmium Plated 4/2"
-8 Phosphate Finish ————_—__—_——_ —
4 3/4" (44mm)
en eee Ee eee ee ae
Proof Load Definition: That load the part must hold without permanent deformation.

ead owe
SNAPS «HOOKS
Part No. 3027 (Military P/N 14-4-598)
Rope Snap, with Safety Guard ——
Drop Forged Alloy Steel aS T% <As a
Proof-load 5,000 Ibs. ' Vf vy.) &y AI
Inside Diameter of Eye: 5/8" (16 mm) ool > 4 at y
Overall Length: 4” et x | * a ‘
Maximum Throat Opening 1/2" (42 mm) . W Ss ee ~ }
Weight (approx.) 5.4 oz. \ we ey
Cadmium Plated A -
SSS a a I IT ES BS AE AO EE
Part'No. 3028 ~ :
Rope Snap : - 7 A
Drop Forged Alloy Steel | “ en Af \
Proof-load 5,000 Ibs. ae 2 Se
Inside Diameter of Eye: 1 1/46" (27 mm) i | 4
Overall Length: 5 3/8” oe _
Maximum Throat Opening: 5/8" (45 mm) a go
Weight (approx.) 9.3 oz. soi '
Cadmium Plated
SE a a a aE ST EE ER,
Part No. 3029 ED
Rope Snap, Ladder Hook ee
Drop Forged Alloy Steel : We
Proof-load 5,000 Ibs. jf a _—
Inside Diameter of Eye: 1" (25 mm) eo
Overall Length 6” | xe 7 Ny)
Maximum Throat Opening: 11/4" (31 mm) ‘ nt ral K
Weight (approx.) 14 oz. aN, ee Qa
Cadmium Plated peer
SS La aE SSS ASD TS LRN SPST SE SIT SS IO TE IE ES ST EID
ee iS THROAT OPENING
art No. =z
Snap, Construction Workers Restraining x WILL ACCOMODATE
Drop Forged Alloy Steel ,, \ #48 REBAR
Proof-load 4,000 Ibs. ‘4 x
Inside Diameter of Eye: 1" (25 mm) x
Overall Length: 81/2" ; 4 8
Maximum Throat Opening 2%" (57 mm) i Ps
Weight (approx.) 30 oz. . tn
Chromate Finish Standard \ ; a | J
RS aR BRT Re SE NS a ea ea SY a BS aN BES IIS SETS ESS le OE ee TE SE Da
Proof Load Definition: That load the part must hold without permanent deformation.

SNAPS «HOOKS
Part No. 3034
Rope Snap
Drop Forged Alloy Stee! ee =
Proof-load 5,000 Ibs. 7 : ae
Inside diameter of Eye: 11/46" (27mm) ; x \
Throat Opening (with guard): 5/8" (45mm) # SA }
Weight (approx.) 8 oz. mea a SS 2
Cadmium or Chromate Finish :
SS SS NS PRE SS PS SS ES EA SES) ETA SS SRN Dy Ci AE EO ES ARES IE ae SOUS TSE GS ETT RS RET
Part No. 3040 ge
Snap Hook, Lineman Pole Strap
Drop Forged Alloy Steel ™ , aan
Proof-load 5,000 Ibs. - aw L
Strap Bar: 134" (44 mm) or 2" (50 mm) Specify Ward
Overall Length: 5" 4 ics \ ,
Maximum Throat Opening: 5/8" ‘5 _ i_~ =
Weight (approx.) 10.3 oz. , ee A
Cadmium Plated i. ae -
ERS I SE I ET SR ee SS a BT
Part No. 3045 a}
Snap, Heavy Duty t  ®?-— #£
Drop Forged Alloy Steel eee PT
Proof-load 10,000 Ibs. f “ON ~"S fai
Strap Bar: 134" (44 mm) [iN gy oN |
Throat Opening: 5/8" (15 mm) \b a = }
Length: 5" Re ~ a
Weight (approx.) 1 Ib. hae eal
Chromate Finish Standard ——
TSE SP SE SORT STD TAI VN PTSD SION LES EE IRS EERE AN > MGT ES FI = SSS ES Sc ES NE LET SES RE SEE EES
Part No. 3047 ea ; =.
Rope Snap < <a ;
Drop Forged Alloy Steel “a . —~ -_— \
Proof-load 5,000 Ibs. \ €3 | 2}
Inside Diameter of Eye: 34" (49 mm) '
Overall Length: 5" XQ mae yy A a wo }
Throat Opening 5/8" (145 mm) +
Weight (approx.) 8 oz. :
Cadmium Plated or Chromate Finish
RS GES SSE ESE ES EP SE A
Proof Load Definition: That load the part must hold without permanent deformation.

SNAPS e HOOKS
Part No. 5020
Swivel Assembly -
Drop Forged Steel = — _—
Nylon Bearings ee \ (it~ ey (24mm)
Proof-load 6,000 Ibs. ry ft... ie 7 43/16"
May be used with any snap with 9/16" (14 mm) or larger eye. ed eae ens : .
Distance between bearing surfaces 31/2" (88 mm) en 2 _ ———
Weight (approx.) 14 oz. Sw 3 .
Chromate Finish Standard 4
SRS LT aN aS SE SF ESE TS ERS SS ea See REE SS a I
Part No. 3034
Rope Snap
Drop Forged Alloy Steel i —
Proof-load 5,000 Ibs. = gms
Inside Diameter of Eye: 1 1/16" (27 mm) 8 fF ®: ‘
Overall Length: 5” a oO
Throat Opening (with Guard): 5/8" (45 mm) . - Se
Weight (approx.) 8 oz.
Cadmium or Chromate Finish
rs Ss CS eI a ES SE Ee ee eS LE Ie ne: el Re
Part No. 3032
Snap, Separator ; = _
Drop Forged Alloy Steel -_— a Vr~ ———
Proof-load 4,000 Ibs. ofl bia VW eS ‘4
Inside Diameter of Eye: 1 4/32” (26 mm) ’ ( a De ; @\ : ™y
Overall Length: 8 7/8” Te, ee (fan ae
Maximum Throat Opening: 5/8” (45 mm) — ee —==-
Weight (approx.) 16 oz.
Cadmium or Chromate Finish
SS a EE ERE AS SEE BIS SER EES TRE SSIS SOT CTP SE SES DIS 2 RENE TEES RE SSPE IL aS SND MINN ap 5 ISERIES ET AS EEN
Part No. 3048 i =
Hook, with 13/4" (44 mm) Strap Bar A 4
Drop Forged Alloy Steel ‘ — gape :
Proof-load 20,000 Ibs. : _— :
Total Length: 5 7/46" f i a 5
Throat Opening: 5/8" (145 mm) iN ; -
Weight (approx.) 1'/2 Ibs. Se 4 F
Chromate Finish Standard 5
(ae SS I IIR LIE ELIE EEL D EE TE SEE RIED OPA EEOC VCO
Proof Load Definition: That load the part must hold without permanent deformation.

SN ead owe
Bs Ets
INSTALLATION DATA
Tap workpiece for Hoist Ring screw with axis q t o-TOND ——
perpendicular to mounting surface. The bd ' Sf |
threaded area should be clean, free of oil, aa ee if
grease and metal chips. The mounting surface ae i
must be flat and smooth to provide full 360° | ~ ij
flush seating for the bushing flange. For > — !
installation in ferrous mating material with 2 - qt
minimum tensile strength of 180,000 psi, the es i xy
screw should be tightened to the full recom- ies be |
mended torque (+0, - 20%) and for weaker te | 7 br ;
material see safety note 4. After installation, \ :
inspect Hoist Ring to be sure that it pivots and ES se
swivels freely in all directions. = oe
SAFETY NOTES = : an
1. Apply lifting force gradually, “Avoid Shock *| :
Loads.” DO NOT load more than the rated <5 : -
capacity. 4 =
2. Some loosening may be developed after % " $
prolonged service in permanent installation. ai: { fe _
It is advisable to inspect periodically and * ‘ope
retighten the mounting screw. If it is J eS ae
necessary to maintain the specific torque, ‘ ~ ty) = ee - .
medium strength loctite may be used to Bees { ig a _
prevent loosening. my i Sees =
3. In heavy usage applications, periodic proof ag ms ‘a :
loading to rated load is desirable. (If shock een ANE! Be ee] “
load or accidental overloading occurs, it is yh 4 bh Bigs ;
recommended that Hoist Rings be replaced). ey rt ( (ie 4 F
4. Formaximum safety, the tensile strength of Pare r (yg) ft
the workpiece must be above 80,000 psi. | ny ? WN ; ats ?
The use of extra length screw is required, if Ney ea te fi | &
weaker mating material must be used, use a A ‘ y' SS !
nut on the open end where possible. Inspect fay S Z W ‘ ; j f hs
and retighten the screw frequently. : ; GA Z S| i} at a
Regarding the required strength of the : Tee sp, “ce eS, os me at
mating material, screw length and torque, re , % -.lCUm™ a *
consult manufacturer when in doubt. '/ A Ca a : . wa a
5. The use of free fit spacers between the ¢: Ko _'€ Yee 4 Bh
bushing flange and the mounting surface is ad be . “SS .
not recommended as this will reduce the Ja © \\ >.
safety load rating on angularly applied a Aree ;

Pivot
MEETS OR EXCEEDS
MIL-STD-1365 (OR-11) & MIL-STD-209C
—_— ~ . - MATERIAL: 4140 Aircraft Quality High
Ae = | Strength Alloy Stee! With Minimum
: = : Tensile Strength of 180,000 psi.
Be — =] Certified Heat Treatment with 100%
$e = Magnaflux inspection.
—~ Corrosion Resistant Plating
X Maximum Operating Temperature: 400° F.
All Hoist Rings Designed at 5:1 Factor of Safety.
SWIVEL 360°
U.S. PATENT NO. 3,297,293
See what happens when The same load applied to an American Safety
heavy side loads are applied Engineered Hoist Ring is translated into a pri-
to a conventional eyebolt. mary tension load at the screw and normal to
the screw axis.
EXCESSIVE SIDE LOADS HIGH TENSION LOADS ARE WELL WITHIN
CAN CAUSE BOLT FAIL- THE DESIGNED SAFETY LIMITS OF THE
URE. STRESSED HOIST RING
INSTALLATION DATA Tap workpiece for hoist ring scew with axis vertical to
mounting surface. Work surface should be flat and smooth to provide full360° flush
seating for the bushing flange. (SAFETY NOTE: Some loosening may develop after
prolonged service in a permanent installation. It is advisable to periodically re-
tightenthe mounting screw to maintain the specified torque value.) The use of free fit
spacers between the bushing flange and mounting surface is not recommended as
this will reduce the safe load rating on angularly applied loads. Hoist Ring must be
free to swivel 360° and pivot 180° at all times.

A-RADIUS
cj} Jn c 6C{ D
BUSHING p= E et
FLANGE = ,-!
G “THREAD
[om [ey.t.[. [eatete|.l[. |. [« |
Load Cc Proj. F J L
[066-0403 | eoo | 76 | +56 | aves | ae | sre | 258 | sree | 2 | 1 | a4 | aw
| 066-0412 | so | 76 | tse | aves | se | ons | 258 | sere | 2 | 1 | a4 | ae
| 066-0421 | 1.000 | ze | tse | aes | se | one | 25e | sew | 2 | 1 | a4 | a2 |
| 066-0430 | 2500 | 16 | 276 | 78 | ve | vine | a4 | vais | 20n6 | ve | rae | 964 |
| 066-0449 | 2500 | ve | sve | vse | a4 | as | eae | vers | soe | 2 | +v2 | aoe |
{066-0458 | 2500 | 7e | ava | rsae | a4 | a4 | o76 | wary | ose | 2 | ve | ase |
[066-0467 | 2500 | 7e | ova | sce | o« | + | «a4 | vara | s5@ | 2 | ve | om |
| 066-0476 | 2500 | 76 | v4 | vse | ve | 1 | 67 | wera | aoe | 2 | rve | ase |
| 066-0500 | 2500 | 7 | sa | sie | oe | tvs | 4a4 | vers | soe | 2 [| 12 | aoe |
066-0519 | 2500 | 7e | ove | vse | a | +ve | e7e | vee | o5e | 2 | vve | axe |
| 066-0528 | 4000 | 7 | sv4 | rsae | as | a4 | 4a4 | sens | soe | 2 | ve | ae |
| 066-0537 | 4000 | 7 | sv | ssiae | a4 | a4 | 6768 | ser | o5@ | 2 | rue | aae |
| 066-0546 | 4000 | 7e | sve | vse | v4 | 1 | 434 | sen | a5 | 2 [ rue | aoe |
[066-0555 | 4000 | 7 | ava | 152 | a4 | 1 | 676 | sen [ se | 2 | ve | ae |
066-1000 | 000 | 76 | sia | vse | aa | via | eae | sen | ose | 2 | v1 | ome _|
| 066-1019 | 4000 | 7 | sua | sse | oe | ta | 670 | serr | soe | 2 | ve | aoe |
[066-1028 | 5,000 | 7 | ava | ree | a4 | 1 | sae | aero | ose | 2 | rve | aoe |
| 066-1037 | 5.000 | 7 | avs | vse | a4 | 1 | 670 | ato | ose | 2 | ve | ase |
| 066-1046 | 5000 | 7 | sua | rsice | a4 | sv4 | 4a4 | a4i0 | see | 2 [| 112 | sae |
| 066-1055 | 500 | 7a | ava | 152 | a4 | tvs | 76 | v4 | ose | 2 | ve | ae |
[066-1064 | sco | 7 | sia | vse | ow | vie | «ae | as | ose | 2 | 112 | ace
| 066-1073 | 5,000 | 7 | ava | tse | a4 | +e | o7e | sei | ose | 2 | ve | aoe |
7000 [rrsise| erate | re [| 1 [| 1 | eve [ ae [ sve [3 | asi | 1764 |
7.000 | rraae[ erste | rave | 1 | + | rise | asto | sve | 3 | sie | ies |
| 066-1126 | 7000 [vsise| atane | rte | + | ve | eve | sei | sve | 3 | 2sne | i764 |
066-1135 | 700 | rise] rane | rire | 1 | ve | rise | ae | sve | 9 | 25n6 | vee
| 066-1144 | 8000 | rise] erate | rive | + | 1 | eve | veo | sve | a | 2sne | i764 |
| 066-1153 | 8.000 | vise | eras | roe | + | 1 [71516 | veo | sve [ 3 [ 2sne | i764 |
| 066-1402 | to000 [raise] erare | rrins | 1 | ve | ove | re | sve | 3 | ase | i764 |
| 066-1411 | 10000 | irae] arse | rte | 1+ | teva | zs5e | re | sve | 3 [| ese | i764 |
| 066-1420 | 10000 [rrsise| ere | tie [ + [| vive | ove | re | sve [a | 2sne | iva |
| 066-1439 | 10000 | via2| erae | rine | 1 | +ve [| zie | re | sve | 9 [ ase | i764 |
966-1448 | 10.000 [rie] rane | tne | 1 | 2 | eve | re | sve | 0 | 25n6 | 70 |
| 066-1457 | 10000 [visi] atane | vrmse | 1 | 2 | zoe | re | sve | 3 [| 2sne | i764 |
| 066-1466 | 15,000 | +a | 6 | 2ve | v4 | 1768 | sae | vve7 | ove | saa | ove [iver |
| 066-1475 | 24,000 | ava | 6 | 234 | v94 | aa4 | 1298 | 26 | ove | +70 | sae | ae |
| 066-1509 | 30000 | 2s | 6 | 294 | ras | ove | izae | oeve | eve | a7 | eae | oe |
066-1518 | 5000 | s [iow | swe | ava | «ve | seve | eve | v.50 | ove] saa | 50 |
066-1536 | 7500 [sae | sve | 0 [eas | sae | rove | oe [vem | [| rv | 1

BEATINGS owe
Safety Hoist Rings
E RADIUS
BUSHING : |
FLANGE J
A-THREAD
RATED | THD. | ACTUAL
PART NO. LOAD DIA. | THD.
Fecoreor | s60 | 2 | ir | 120 | 05 | woo] ora [sos [sor [asa | 01

aN 735 AVOCA AVENUE, DORVAL, QUE., CANADA, HSP 1G4_ TEL. 514-631-9815 TELEX 05-822633
Used in mining,construction,
engineering, chemical /oil
industries and general
- maintenance
ale . \ 3 MODELS
5 TO 1 SAFETY FACTOR 3" TO 12" CAP
VA ay \.> 2 MODELS J
aN 12 TO 5 TONS
a. go> 3” TO 12” CAP.
es ‘ FIXED JAW GIRDER CLAMP
E Where loads are to be suspended, the fixed jaw clamp provides an effective anchor
= oe point when attached to an arched beam or an overhead girder Equally the clamp gives
é a positive hold when lifting individual beams, or fabricated beam sections. The right
and left hand threaded tension bar ensures maximum speed in its application.
SWIVEL JAW GIRDER CLAMP
Developed and patented by Riley's Engineers, the swivel jaw action enables this clamp <
to deal with any size of universal beam, or rolled steel joist, whilst maintaining
maximum hold 3
a2. . A 4 TON CAP.
es 7 ~~ F 6” TO 12” CAP.
ae 3” TO 6” CAP. la! > il 9 *
PIPE CLAMP
A recent addition to our Superclamp Range. The unique design and efficiency of the
PIPE SUSPENSION CLAMP Pipe Clamp out-dates present methods of circular section handling
Fit in seconds this double action clamp is attached to existing columns or overhead When applied to overhead circular structures the clamp can be used as an anchor
structures where pipe lines are required supplying a positive hold to the pipe line _ point for the suspension of loads.
assembly
F 3 TON CAP. |
3” TO 6” CAP. Vy
MONORAIL CLAMP SQUARESECTIONCLAMP = =—s—C(Cs .
Offering a quick and safe method of suspending monorail section, this clamp is being Designed initially for 8 CUStOmet involved in the lifting of square and rectangular
extensively used in areas of industry where overhead traverse rails are in operation,  S©CUONS, this Clamp iS now a standard model in our range. Wii -
and is easily transferable to other sites W here loads are to be suspended the clamp provides an anchor point when applied to
overhead square and rectangular structures.